SKC OSHA/NIOSH/ASTM Sampling Guide for Iodine
Chemical Hazard
Iodine
CAS. No.
7553-56-2
Sampling Methodology
Sampling Parameters
Agency Standards (ppm) |
Volume |
Rate |
Time |
---|---|---|---|
C/STEL 0.1 (C) |
2.5 L |
500 ml/min |
5 hrs |
Analytical Method
IC
SKC Sampling Equipment
Sorbent Tube:226-80
Air Sampling Pump:220-5000TC
Limit of Detection
Quantitative: 0.0004 as I2 (2.5 L air sample) Qualatative 0.0010 as I2 (2.5 L air sample)
This SKC Air Sampling guide is a reference only to assist users in finding the method, sampling equipment, and sampling media for a specific compound. This publication is intended for general information only and should not be used as a substitute for reviewing applicable government regulations, equipment operating instructions, or legal standards. Users must consult the appropriate sampling method for the compound of interest before sampling. The sampling parameters shown here are suggestions based on the ranges or volume, flow, and time specified in the methods. It is the responsibility of the analyst performing the sampling and analysis steps to adjust the parameters so that the required detection limits can be obtained. The information contained in this document should not be construed as legal advice or opinion nor as a final authority on legal or regulatory procedures.